|
The Wasp is a small flying wing with excellent performance. Designed around an inexpensive CD-ROM brushless outrunner motor,
this little plane will impress you and your fellow RC-pilots with itīs speed and itīs ability to accelerate vertically.
The Wasp is easy to fly and itīs a pleasure to cruise around at 1/3 throttle. But when you increase the throttle The Wasp
turns into a fast little screamer. The clean aerodynamic lines of the plane and the High Performance MH wingprofile ensures
that you get the most from the motors output. Even when you shut off the motor and let the plane dive, it picks up speed very
quickly thanks to the small aerodynamic shape. Launching the plane is very easy and done with 1/3 to 1/2 throttle. Landings
are just as easy.
The Wasp will do all the basic aerobatic manuevers that doesnīt require rudder. But the most impressive ones are huge
loops, multiple quickrolls, fast lowlevel fly-byīs and going straight up while rolling until the plane is just a little speck
in the sky
The Wasp is delivered as a kit with precision lasercut quality Andino balsa and plywood. The fuselage is vacuumformed
and supported by the internal structure. The Wasp incorporates some unique designfeatures that makes the model very light
and strong. Also included in the kit are several extra tools to help with balancing the model and adjusting the control throws
You can download the isntruction book from the "Downloads" page or order a printed copy below.
Wingspan 28"
Length 12"
Weight (ready to fly) 6.3oz
Recommended equipment:
2 - micro sevos or smaller
1 - Micro receiver
1 - Brushless 10 A ESC
1 - Brushless CD-ROM outrunner motor or similar
1 - Li-Po 3S1P 20C 360 mAh Battery
1 - CAM Speed Prop, 12 - 12 / 4.7 - 4.7
The model in the videos is equipped with the following:
2 - GWS Naro micro servo, 9 g
1 - Jeti REX 5 plus receiver
1 - Castle Creations Phoenix-10 ESC
1 - GoBrushless.com GBv1.1 CD-ROM motor, 12 turns
1 - Kokam 3S1P 20C 360 mAh LiPo Battery
1 - CAM Speed Prop, 12 - 12 / 4.7 - 4.7
(Back to kits)
|
