|
INTERMEDIATE LEVEL KIT
A Peter Rake design airplane.
The DH-6 is one of the older Rake designs that Pete has converted to CAD so everyone can have the advantage of laser cut
parts. Unfortunately there is not a build thread for help. But, a note on the EZone or to Peter himself will get you whatever
help you need.
THe DH-6 is a very nice build that flies well. Not very complicated, and, can be detailed as much or as little as you
want.
The construction is typical of Rake designs with a box front fuselage and framed rear section. A straight fuse is easy
to obtain and is very strong. A roomy fuselage allows easy access to radio gear and a wide range of battery locations to
obtain the proper CG.
The design power package is the Olympus gear box and the Sp400 motor on 7cells. This setup gives very good scale type
performance from this plane. Set up for 3 channel control (rudder/elevator/throttle).
Specifications:
Wingspan: 36"
Length: 27"
Weight: 22 oz
Wingarea: ~400 sqin
Recommended power:
7.2vSP400
Olympus 2.33:1 gear drive
7x500AR NiCd (or 2sLiPo)
10x6 or 11x7 MA electric wood prop
International Shipping click here
(Back to Kits)
|
