Dave Blum

Dave Blum is noted for his light weight park fliers. We are proud to offer these creations of his.  The designs are simple to build but we still recommend them for intermediate skill levels. There is very little needed to complete Dave’s kits.

Jelleybean

Dave Blum Jelleybean
  $64.95

41” Jellybean

Weight: 19oz.
Motor: AXI 2208-34
Battery: 3s 1320 LiPo

Kit includes the plans, ID list, plastic canopy, plastic cowl, plastic upper fuse parts, and the laser cut sheets

Needed to complete.  Motor, battery, receiver, servos, ESC and the following:
Quantity     Item
  1    3" long 1/8 Dia wood dowel for elevator joiner
  1    14" long 1/16 Dia wire for landing gear
  2    11" long 1/16 Dia carbon rod for pushrods
  1    16" long .032 wire for pushrod ends
  1    3" long 1/8 Dia shrink tube for  pushrod end retainers
  1    5" long 1/16 OD aluminum tube for  aileron pushrods
 

website design software
Bede BD-5

Dave Blum Bede BD-5
  $59.95

30” BD5

Motor: PJS3400
Battery: 3s240 LiPo

The BD5 kit includes the plans,  plastic canopy, plastic nose and laser cut parts.

Parts needed to complete.    Motor, battery, receiver, servos, ESC and the following:
Quantity     Item
1              9.75" long carbon tube 3/16 OD x .118 ID for  driveshaft.
                   (Dave got this  from Goodwinds Kites)
1              2.4" .070 carbon rod for stab pivot in rear fuselage
2              .75 long .125 OD x .070 ID carbon  tube for stab pivots
 

One Eighty Too

One Eighty Too
  $54.95

37” One Eighty Too

Motor: GWS IPS with 6:1  gear ratio
Battery: 2s700 LiPo
Weight RTF:  8oz

The  kit includes the plans, ID sheet, plastic nose, plastic wheel pants,  plastic spinner, windshield and back window, and  laser cut wood parts.

Needed to complete.  Motor, battery, receiver, servos, ESC and the following:
Quantity  Item
1          14.5" long 1/16 carbon rod for cabin area bracing
1          18" long .047 wire for landing gear
3          Round toothpicks for elevator joiner and hatch / wing pins
2          8" long 1/16 OD aluminum tube for  pushrods
1          18" long .032 wire for pushrod ends
1          small nylon bolt for wing hold down
 

One Eight Fiver

One Eight Fiver
  $24.95

24” One Eight Fiver

Motor: GWS LPS (short)
Battery: 2s300
Weight RTF:  5oz

The kit includes plans and laser cut wood parts.

Needed to complete.  Motor, battery, receiver, servos, ESC and the following:
Quantity   Item
1            9" long .032 wire for landing gear
1            21" long .025 wire for pushrods and  tail wheel
1            2.5" long 1/4 Dia wood dowel for motor mount
1            Round toothpick for elevator joiner

 

[Home] [New Releases] [Custom Cutting] [Catalog] [Peter Rake] [WarbirdKits] [AerodromeRC] [Dave Blum] [Pat Tritle] [Other Designers] [Small Models] [Micro Models] [Magazine Parts] [Prototype Parts] [Builders Kits] [Accessories] [Gallery] [Downloads] [FAQ] [Contact Us] [Shipping Charges] [LINKS]